Finishing and polishing of composite resins

Finishing and polishing of composite resins

CADERNO ODONTOLOGIA CLÍNICA/BÁSICA   Volume 3 – NúmePágina 328 – 334ro 11 – 2012     Artigo original / Original article Finishing and polishing of composite resins Nasser Hussein Fares Maria tereza F. S. D’azevedo Reinaldo Missaka Marcelo Guerino Couto Renata M. Mello   Abstract In sequential order, three different steps are used to finish a composite resin restoration. Reanatomization, finishing and polishing are clinical procedures performed to obtain better esthetics and longevity of restorations. The objective of this study was to evaluate the degree of surface roughness of three brands of composite resin subjected to three different techniques of finishing and polishing. 45 specimens measuring 6 mm in diameter and 3 mm of thickness were polymerized in a polyester matrix with a Microdont LED Light Curing Unit, with an exposure time of 20 seconds, and divided randomly into 4 groups. In applying the techniques were used two brands of finishing discs, enhance system and as control group the polyester matrix only. After surface treatment, the roughness of the specimens was evaluated with Ra as universally recognized parameter. The results revealed the existence of significant differences in both variables, with other words, between the composite resins and the techniques employed. The highest values of Ra in roughness in descending order were Suprafill > Esthet–X > Filtek > Z350 XT. The applied techniques didn´t show any uniformity. The smoother surfaces were obtained with polyester matrix and in the treated specimens the best polishing were obtained with the finishing and polishing discs.   Descriptors: Surface roughness, dental composite resin, finishing and polishing.   Resumo Em ordem sequencial, três diferentes etapas são utilizadas para finalizar a restauração de resina composta. Reanatomização, acabamento e polimento são procedimentos clínicos executados para obter melhor estética e longevidade de restaurações. O objetivo deste estudo foi avaliar o grau de rugosidade da superfície de três marcas de resinas compostas, submetidas a três técnicas de acabamento e polimento. 45 espécimes medindo 6 mm de diâmetro e 3 mm de espessura foram polimerizados sob uma matriz de poliéster com fotoativador LED da Microdont, com tempo de exposição de 20 segundos e divididos aleatoriamente em 4 grupos. Na aplicação das técnicas, foram usadas duas marcas de discos de lixa, sistema enhance e no grupo controle somente a matriz de poliéster. Após o tratamento da superfície, os espécimes foram avaliados em um rugosímetro e o parâmetro usado foi Ra, medida universalmente reconhecida. Os resultados revelaram a existência de diferenças significantes em ambas variáveis, ou seja, entre as resinas compostas e as técnicas empregadas. Os maiores valores de Ra em ordem decrescente de rugosidade foram Sprafill> Esthet-X> Filte> Z350 XT. As técnicas aplicadas não apresentaram uniformidades. As superfícies mais lisas foram obtidas com a matriz de poliéster, e nos espécimes tratados os melhores polimentos foram obtidos com os discos de lixa.   Descritores: Superfície rugosa, resina composta, acabamento e polimento.

Este conteúdo é restrito a membros do site. Se você é um usuário registrado, por favor faça o login. Novos usuários podem registrar-se abaixo.

Login de Usuários
   
Registro de Novo Usuário
*Campo obrigatório
Abrir conversa
Precisa de ajuda?